You learn something new every day.

For years I’ve thought that the only reason to use bearer bars around an ITF-14 barcode is to improve the image quality in the flexographic printing process. As their name implies, the bearer bars “bear” the impression force and protect the narrow bars from spreading and distortion from the flexible plate.

Bearer Bars are not only for bearing the impression force

While that it true, it is not the only reason to use bearer bars with an ITF-14 symbol. In fact GS1 recommends the use of bearer bars with all ITF-14 symbols, including those printed with on-demand technology such as thermal transfer. Why?

It has to do with the nature of the ITF-14 which is the only barcode with the possibility of a partial read. Partial reads can occur when the symbol is skewed in relationship to the scanner, such that only a portion of the barcode is decoded. This is possible because of the way the ITF-14 symbology is engineered. Without going into the details, suffice to say it is a known fact in the barcode technical community.

Use bearer bars with all ITF14 symbols no matter how they are being printed

When thermal transfer printing the ITF-14, putting a bearer bar above and below the bars in the symbol prevents a partial read by disrupting the total bar-space pattern count detected by the scanner, and signaling a misread, which is much better than a successful partial read.

Since the bearer bar used in thermal transfer printing does not actually “bear” any impression force, it can be narrower than the bearer used in flexo printing. The GS1 specification calls for it to be 2X or twice the width of the narrow element, and it need not extend into the area over and atop and beneath the quiet zones.

The nominal width of the bearer bars used in flexo printing should be 0.19 inches and must surround the symbol.

An important word of caution: make sure the surrounding bearer bar does not encroach into the quiet zones. This is a consideration not only at the design stage, but also at the printing stage. Leave enough space so that the quiet zones will be intact even if the bearer bars spread excessively in printing.

Don’t violate quiet zones with surrounding bearer bars

The rule of thumb with quiet zones is that too much is always fine; too little is always a problem.

Let me know what you have experienced with bearer bars and printing barcodes on corrugated. And let me know of other topics you would like to hear about.

Recommended Posts

3db Barcode Testimonial

Our company (an advanced software company) recently worked with Barcode Test to source a barcode verifier.  Not long ago, we were awarded a contract requiring products to be marked with IUIDs in accordance with MIL-STD-130.  For that standard, marking labels must pass a verification test that evaluates many variables (contrast, size, clarity, syntax, modularity, and more).  After a thorough search, we reduced our options to a select few.

In our search for a verifier, the Axicon line caught our attention.  Barcode Test is our regional reseller for this product.   From the beginning, they were very prompt with their responses.  We ended up having a quick call with John Nachtrieb to go over our needs.  John was extremely easy to work with and provided a lot of great information.  He was very knowledgeable on the matter and was quick to offer up a demo unit (free of charge).

Upon receiving the demo verifier and testing it, a few questions arose.  John joined a call with us and answered all our questions.  Ultimately, the Axicon verifier wasn’t the best fit for us, so we shipped the demo back.  John was completely understanding.  A few weeks later, Barcode Test reached back out with another possible verifier for us to try.  While they didn’t sell that brand, they just wanted to help us find the best option that met our needs. They even offered to send us the unit that they have in-house to see if it worked to our liking. 

Barcode Test is truly a great company to work with.  Their service and willingness to help the customer are far beyond what you typically get from other companies.  They are experts in barcode quality assurance and seem willing to help in any way they can (even if that means not getting a sale and recommending another option that better fits the customer’s needs).  If anyone is in the market for barcode verification/scanning services or products, I would highly recommend giving Barcode Test a call.

Regards,

Production Manager