Barcode verifier accessories

The PV1000 makes an Axicon 6015, 6515 or 7015 USB verifier portable. It displays the encoded data and the grade on the main screen, and the remaining data is readily accessible by scrolling down.

Description

The PV1000 can store up to 100+ scans, depending on symbology and density. The full verification data can be viewed on the 2-line LCD or easily transferred to the user’s PC where the color-coded verification report can be viewed, saved, printed or emailed. In addition to the 6015, 6515 and 7015, the PV1000 is compatible with the IP versions of the 6515 and 7015. We also have two printers the PV1000 can connect to: a wall current model (with International switching power block) and a battery powered portable printer so you can “take it on the road” and be completely self-contained. We also have an optional Rubber Boot that protects the PV1000 against drops and scrapes.

The PV1000 makes an Axicon 6015, 6515 or 7015 USB verifier portable. We have two printers that connect to the PV1000: a wall current model and a battery powered portable printer.

Description

The Citizen PV printer is a wall current printer with a switching International power block, making it compatible with US and European power. The Star PV comes with batteries and recharger for a completely portable verification operation.

The Axicon Pause Interface pauses selected thermal printers if your 6525-S or 7025-S verifier detects a below-acceptable quality barcode.

Description

The Axicon Pause Interface monitors the output from your 6025-S or 7025-S high speed verifier and sends a pause signal to a suitably equipped thermal or thermal transfer printer of a barcode is encountered with a below-acceptable (user defined) grade.  This barcode verifier accessories enables the verifier to do 100% verification on every picket-fence oriented 1D barcode that passes within its scan width. This is a must-have accessory for shipping label departments. Pause Interfaces are available for Zebra Xi (with Applicator Board and available I/O port), TEC series (with an available I/O port), Sato GL and Datamax (with GPIO). Other brands/models may be available depending upon printer schematic and pin-out. Use the Learn More link below for further information.

Test your verifier to make sure it is compliant with ISO specifications for a barcode test instrument. IQ/OQ/PQ kits are available for 1D or 2D verifiers.

Description

Axicon has developed an IQ/OQ/PQ (installation, operational and qualification) test protocol kit to meet the requirements of users who want to be able to rigorously check their equipment on-site. Many companies, especially those in the pharmaceutical and medical device sector, will be familiar with Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ) testing. These are tests designed to check that the relevant equipment has been installed correctly, that the equipment operates correctly, and then works correctly as intended.

The IQ/OQ/PQ Kit is available for Axicon verifiers, and is available in two forms, one for linear barcode verifiers, and one for the 2D barcode verifiers.

Each kit comprises a set of precision-made, NIST-traceable reference test cards and a protocol document. (NIST is the USA’s National Institute of Standards and Technology.) When the user has carried out the tests they can be sure the verifier is working as intended, and it can be re-certified as being compliant.

Each of the cards is printed with a precisely engineered symbol of known size and characteristics, and these are used in turn to check particular aspects of the verifier’s operation.

Once the test has been completed satisfactorily, the user can self-certify that their particular verifier is compliant with the relevant ISO/IEC standards. For linear barcodes, these are ISO/IEC 15426-1 and ISO/IEC 15416, while for 2D verifiers they are ISO/IEC 15426-2 and ISO/IEC 15415. (Any verifier that can assess both linear and 2D symbols must comply with all four standards.)

If the verifier does not meet the requirements of the PQ tests, it must be returned to Axicon for servicing and factory configuration.

New Axicon 1D and 2D verifiers come with a dated NIST traceable reflectance calibration card, which expires in 24 months under normal usage. Replacements are recommended to make sure you are accurately re-calibrating your 1D or 2D verifier accurately.

Description

Single cards or 5 Packs are available. These are Axicon branded calibration cards but can be used to calibrate any ISO compliant 1D or 2D verifier. Use the Learn More link below for further information on barcode verifier accessories.

The Series Stabilizer is a clear plastic fixture that fastens to the scan window of the 6000 series Axicon verifier. It helps the user hold the verifier at exactly the right angle to ensure verification accuracy.

Description

The Axicon Series Stabilizer is a standard equipment with the S range 6000 series verifier, but is a low cost option for standard 6000’s such as the 6015. It makes it easier to verify barcodes in situations where it is difficult to be sure of the correct angle–for example, verifying barcodes on a wide press sheet, or in any situation where the user wants to make accurate positioning of the 6000 verifier quicker and easier. User the Learn More link below for further information.