Twenty Essential Things to Know for Companies Using Barcodes

 In 301
  1. The barcode on your product must be the right kind of barcode for your supply chain. The wrong type of barcode containing the right data is not acceptable in most supply chains. Check with your trading partners.
  2. Red is an unacceptable color for a barcode, or a color containing a lot of red, including some oranges and purples.
  3. Green, and some shades of green, are an unacceptable background color for a barcode.
  4. To avoid chargebacks, your barcode must pass ISO standards for print quality with at least a C grade. Some industries require a higher grade. Some will accept a D grade. F grades are always unacceptable.
  5. The data in your barcode must comply with the formatting specifications for your industry. For example, a medical device must be marked with a barcode formatted to the UDI standards.
  6. The human readable information is not necessarily an exact duplicate of the data encoded into a barcode.
  7. Testing a barcode for legibility with a scanner or smartphone does not establish legibility on other devices or scanners. Only an ISO compliant verifier can predict whether a barcode will be legible on any type of scanner.
  8. Just because a device can produce a grade, or produces a report in the ISO format does not mean it is an ISO compliant verifier. Only a device with a dated Certificate of Conformance is an ISO compliant verifier.
  9. Technology does not guarantee that a barcode will work. Barcode creation software and digital printers do not eliminate the need to verify with a compliant device.
  10. Virtually identical products with subtle differences should be marked with different barcodes, if you need to track them separately—and you probably do.
  11. The barcode on your product should be located in accordance with industry standards. For guidance, see the GS1 General Specification.
  12. You can buy cheap barcodes from an aggregator or reseller but it is not a good idea. An aggregator buys a block of numbers from GS1. Those numbers are unalterably registered to the aggregator and cannot be re-registered to you. Get your number assignment directly from GS1. It is worth the extra cost.
  13. If you do not want to acquire a verifier, use a barcode test lab. Periodic tests establish a benchmark, and repeatability is established over time.
  14. It is almost never necessary to test 100% of your barcodes. If you are advised to, ask why and insist on an answer that makes sense to you, in your industry. Confirm it with your trading partners.
  15. If someone else prints your barcodes, you are still liable if they do not work right. Tell your vendor that you require verified barcodes, and prove that they do.
  16. Contrary to popular opinion, the new 2D barcodes are not immune to quality problems, and they do require a full surround quiet zone.
  17. Some 1D barcodes have optional check digits. If you are using this type of barcode, check with your trading partners to determine whether a check digit is required.
  18. As of January 2019, a GTIN 12 assigned to a product that has been discontinued cannot, with very limited exception, be reassigned to a different product.
  19. Barcodes have a range of acceptable sizes and dimensions. Just because you are capable of printing small barcodes with very fine bars and spaces doesn’t mean it is acceptable.
  20. Rules and standards are impermanent. Barcode standards are constantly evolving. Check with a barcode expert to make sure you are doing things right.

#barcode #quality #chargebacks #verification

Recent Posts
Comments
  • Robert Egan
    Reply

    All great points John! Thanks for sharing.

Leave a Comment

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.