Axicon 15500 1D/2D “Universal” Verifier

The Axicon 15500 1D/2D verifer has the largest field of view of any handheld universal verifier currently available–95mm x 70mm (3.74″ x 2.76″) The high resolution camera can synthesize apertures as small as 5mil. Axicon’s “so smart it’s simple” software is UDI compliant, and the 15500 is certified to ISO/IEC 15415 and ISO 15416. It is also 21 CFR Part 11 certified.

Clever user-focused engineering makes the 15500 multi-positionable without requiring special fixtures.

 

 

 

Axicon 12000 2D Verifier

12000The Axicon 12000 is an ISO compliant verifier for smaller 2D symbols (5 mil minimum X)  that fit within its 25mm wide x 18mm high (1″ x .625″) field of view. It is the perfect device for most pharmaceutical and medical device Data Matrix codes.

Description

The 12000 is tethered to the user’s PC with its included USB2 cable. It is a complete kit including the verifier, international-ready power supply, software CD and reflectance calibration card, all in a hard plastic transit case.

Accessories Presentation Stand

Axicon 12600 2D Verifier12000

The Axicon 12600 is an ISO compliant verifier for 2D symbols (8 mil minimum X)  that fit within its 2″ x 1.5″ field of view. It is suitable for QR Codes, Aztec, PDF417, MicroPDF, Data Matrix codes as well as a range of 1D barcodes such as UPC.

Description

The 12600 is tethered to the user’s PC with its included USB2 cable. It is a complete kit including the verifier, international-ready power supply, software CD and reflectance calibration card, all in a hard plastic transit case.

Axicon 12700 2D Verifier

Axicon 12700The Axicon 12700 is an ISO compliant verifier for mid-s1ze 2D symbols (8 mil minimum X)  that fit within its 2.75″ x 2″ field of view. It is suitable for QR Codes, Data Matrix, Aztec, PDF417, MicroPDF as well as linear barcodes that fit within the field of view.

Description

The 12700 is tethered to the user’s PC with its included USB2 cable. It is a complete kit including the verifier, international-ready power supply, software CD and reflectance calibration card, all in a hard plastic transit case.

Axicon 12900 DPM Verifier

The Axicon 12900 DPM Verifier differs from other Direct Part Mark verifiers in its ability to focus on symbols that are embedded within a subassembly. Focusing is a simple, intuitive and very accurate “converging laser” system. The digital read head can be moved up 6” or down to reads symbols in contact beneath the base.  Five different lighting options enable verification complying with ISO/IEC 15415 and the AIM DPM Quality Guideline (ISO/IEC TR 29158).

Description

The Field of View is 1.3” x 1”, and automatically sets the correct aperture for symbols with X dimensions as small as 5 mil. The 12900 has a 1 year factory warranty.

Axicon Omni 2D Verifier

OmniThe Axicon Omni is a table top light box type verifier which is available in two sizes.  The Standard Omni has a field of view of 4″ by 3″ (9 mil minimum X). It can verify virtually any 2D symbol and many 1D barcodes. The

Omni XL has a field of view of 6″ x 4.5″ (7 mil minimum X) and has the capability of verifying any 1D and 2D symbol within its field of view–all at once.

Description

The Axicon Omni range makes it possible to verify entire sheets of drug blister packs, compliance shipping labels and other multiple symbol packages and labels in one quick and easy operation. It is a complete kit including the verifier, international-ready power supply, software CD and reflectance calibration card, all in a hard plastic transit case.

 

Webscan 2D USB DPM Tower

imgres

The 2D USB DPM Tower makes it easy to test and grade low contrast Data Matrix symbols on non-flat surfaces, such as recessed areas of sub-assemblies and component-populated printed circuit boards.

Description

The 2D USB DPM Tower uses a laser to focus its high-resolution camera, and special DPM lighting to acquire the Data  Matrix symbol image. Its adjustable height feature enables it to be positioned for your most demanding verification challenges. Not just for DPM–it has user-selectable 45 degree lighting for ISO15415 and AIM DPM (45Q or 90)–perfect for virtually any DPM application including dot peen and laser etched UID. And not just 2D–the Tower can verify 1D barcodes too.